Radiforce LX300W

The 29.8-inch 4 megapixel monitor in widescreen format is designed for use in operating rooms (interventional radiology, cardiology, or surgery). It is a value for money solution for smaller examination and operating rooms where individual monitors increasingly are being replaced by large-format screens capable of displaying multiple image sources simultaneously.

Environmentally-friendly LED backlight offers a maximum brightness of 750 cd/m².
Intelligent cooling system automatically measures the internal temperature of the monitor and operates with a regulated fan or without any ventilation at all.
Fail-safe function displays additional video signal in the upper left corner of the monitor in case of interruptions in the system’s image transmission.
Up to three video sources can be displayed simultaneously.
Flexible operating modes in landscape and portrait format.
Grayscale tones adjusted at the factory to meet DICOM Part 14 standard for optimum viewing of medical DICOM images.
Five factory calibrated Look-up tables adaptable to diverse modality environments.

Features

Everything in a Single Glance

Large widescreen monitors with high resolution can be used instead of single 1 Megapixel monitors in ceiling suspensions. Compared with multi-monitor scenarios, these large screen monitors have no regional color differences or obtrusive bezels, thus reducing eye fatigue and the potential for distraction.

View Accurate Images in Moments

EIZO’s fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.

Comfortably View from Any Angle

Wide viewing angles allow the monitor to be viewed from the side with minimal color shift, thus offering a quality image to multiple persons watching from different perspectives simultaneously.

Controlled Cooling

The monitor features intelligent cooling concept by measuring and controlling the inside temperature. A mode without fan cooling is selectable so the controlled laminar airflow will be undisturbed within the room as far as possible.

Fail-Safe Function

Special fail-safe mode through DVI input for emergency information from the system for a certain timing. As soon as the timing is active, the information will be shown immediately on the upper left screen side.

To Top

Flexible Operation Modes

Up to three input signals can be displayed simultaneously. The images can be arranged side by side or as Picture in Picture (PiP), while image rotation is managed by the monitor.

Communication Interface

The communication interface is routed via the DVI or USB connection. The operating states of the monitor can be read and switched via the interface, e.g. in Power Safe Mode. In particular, the monitor functionality can be queried using the interface.

LCD Panel Protector for Easy Cleaning

The panel protector secures the screens from scratches, damages and liquids and alleviates cleaning and disinfection of the front surface.

Environmentally-Friendly LED Backlight

By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL backlights, LED backlights deteriorate more slowly and thus the monitor offers a longer service life. Since the LED backlight is mercury free, it will reduce any potential impact on the environment when it is disposed of.

Diagnostic Precision with Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.

Maintain the Precision

Monitor calibration can be carried out to maintain DICOM Part 14 compliance for rendering consistency over time.

Brightness Uniformity for a Steadier Image Across the Screen

The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.

Arm Mountable VESA Compliance

VESA compliance to be attached to existing mounting accessories.

Customer Assurance with Medical Standards

The monitor meets the strictest medical, safety, and EMC emission standards.

To Top

Specifications

General

Model Variations	LX300W: Without Stand, without Panel Protector LX300W-S: With Stand, without Panel Protector LX300W-P: Without Stand, with Panel Protector
Cabinet Color	Black
Certifications & Standards (Please contact EIZO for the latest information.)	CE (Medical Device Directive), IEC/EN60601-1 (2nd edition), IEC/EN60601-1 (3rd edition), CAN/CSA C22.2 No. 601.1-M90, CAN/CSA C22.2 No. 60601-1-08, GB4943.1 (non-tropical, altitude<2000 m), UL60601-1, FCC-B, RCM, RoHS, China RoHS, WEEE, CCC
Supplied Accessories	AC power cord (eu, us, jp, LX300W-S only), dual link signal cable (DVI-D ~ DVI-D, LX300W-S only), Utility Disk (Instructions for Use)

Panel

Type	Color TFT LCD Panel (VA)
Backlight	LED
Size	76 cm / 29.8″ (756 mm diagonal)
Native Resolution	2560 x 1600 (16:10 aspect ratio)
Viewable Image Size (H x V)	641.0 x 401.0 mm
Pixel Pitch	0.2505 x 0.2505 mm
Display Colors	10-bit colors (DisplayPort) : 1.07 billion (maximum) colors 8-bit colors: 16.77 million colors
Viewing Angles (H / V, typical)	170° / 170°
Brightness (typical)	750 cd/m²
Recommended Brightness for Calibration	400 cd/m2
Contrast Ratio (typical)	1100:1
Response Time (typical)	20 ms (On/Off)

Video Signals

Input Terminals	DVI (dual link / single link) x 1, DVI (single link) x 1, HDMI (DVI-signal) x 1, DisplayPort x 1
Digital Scanning Frequency (H / V)	31 – 100 kHz / 29.5 – 61 Hz Frame synchronous mode: 59.5 – 60.5 Hz

USB

Standard	USB 2.0
Function	1 upstream, 2 downstream

Power

Power Requirements	AC 100 – 240 V: 50 / 60 Hz
Maximum Power Consumption	150 W
Power Save Mode	Less than 20 W
Power Management	DVI DMPM, DisplayPort 1.1a

Features & Functions

Sensor	Backlight Sensor
Digital Uniformity Equalizer	Yes
OSD Languages	English, German

Environmental Requirements

Degree of Protection	IP20

Physical Specifications

Net Weight	LX300W-S: 19.5 kg +/- 1 kg
Net Weight (Without Stand)	LX300W: 15.5 kg +/- 1 kg LX300W-P: 18.5 kg +/- 1 kg
Hole Spacing (VESA Standard)	200 x 100 mm and 100 x 100 mm, M4, depth 8 – 11 mm

To Top